The Planet of the Vapes ONE (POTV ONE) packs full temperature control and a glass mouthpiece into a 144 g body that vanishes in your pocket. It's one of the smallest full-featured portables we've tested. At budget-friendly pricing, it's also the cheapest entry into POTV's glass ecosystem of bubblers, water pipe adapters, and cooling stems.
POTV launched the ONE in 2019 on the same platform as the Fenix Mini and Fury 2. The hybrid heater mixes hot air with contact heat, and our convection vs conduction guide explains how that plays out. It reaches temperature in about 30 seconds, and you get single-degree control across 160-221°C. It's built for solo sessions with loose 0.1-0.15 g loads.
The ONE earns a spot on our best budget vaporizers ranking, but it has clear limits. The non-replaceable battery and compact oven mean heavy users will outgrow it fast. For light to moderate solo use, we find this vape still pulls its weight.
What's in the Box
POTV includes a complete starter kit:
- Planet of the Vapes ONE vaporizer
- Dimpled glass stem
- Magnetic accessory attachment
- Dosing capsule (1)
- Concentrate pad
- USB-C to USB-C charging cable
- Loading tool, tweezers, and cleaning brush
- Spare gasket and screen
- Quickstart guide
The magnetic attachment takes POTV's compatible glass. Swap between the included dimpled stem, optional bent mouthpieces, mini bubblers, or a water pipe adapter without tools.
An earlier ONE kit. Today's box swaps in the magnetic attachment, a dimpled glass stem and a USB-C cable.
144 g Metal Body Built for Pockets
The POTV ONE uses a metal shell with a soft-touch coating that shrugs off pocket wear. At 144 g, it weighs less than most smartphones and slips into a pocket without adding bulk. Just keep the glass clear of loose keys. POTV sells it in Black and Teal.
The digital display covers the top face. It shows the target and current temperature plus battery level while heating, then swaps the target for a session countdown. The display also flips, so it reads the right way up in either hand. Haptic vibration fires on power-on, at target temperature, and at shutdown, so you never need to glance at the screen mid-session.
The dimpled glass stem slides into the magnetic accessory attachment, which pops on and off cleanly. Grab the attachment, not the glass, when you pull it off. The glass is thicker than expected for a budget portable, and we've pocketed it daily without a crack. POTV backs the ONE with a 2-year warranty when you buy direct, so hang on to the serial number.
The ONE sits in one hand with room to spare.
Hybrid Heater with Single-Degree Control
The POTV ONE is a session vaporizer that heats up in about 30 seconds and runs on a 4-minute session timer. The titanium bowl holds about 0.1-0.15 g loosely packed and sits over a stainless steel heater. POTV keeps the airpath isolated from the electronics.
Temperature control spans 160-221°C in single-degree steps. At lower temperatures around 180°C, expect light, wispy draws that showcase your strain's terpenes. Push past 200°C for thicker clouds with more body. Our temperature guide walks through how each setting trades flavor for vapor density.
Draw resistance stays low when the oven isn't overpacked. A medium grind with a light tamp gives the best airflow and most even extraction. Pack too tight and you'll choke the draw, leaving green spots in your AVB.
The dimpled glass stem cools the vapor and noticeably smooths out higher temperatures. For even cooler hits, POTV sells curved bubblers and a water pipe adapter that snap into the same magnetic mount. With the adapter, you can hook the ONE up to a bong.
Best POTV ONE Temperature Settings
| Setting | What you get |
|---|---|
| 180°C | Light, flavorful draws with the brightest terpene taste |
| 185°C | Our first 4-minute cycle on a fresh load |
| 195-200°C | A balance of flavor and visible vapor |
| 210°C | Our second cycle, to finish the same load |
| 221°C | The thickest clouds, with a harsher throat feel. POTV's setting for concentrates |
POTV's own recommendation is 198°C, with light to medium draws of 3 to 5 seconds. The dimpled glass stem smooths the upper settings, and a bubbler smooths them further.
Battery Delivers Up to 8 Sessions Per Charge
The ONE's built-in 1600 mAh battery runs around 30-40 minutes, or 6-8 four-minute sessions depending on your temperature. A full recharge takes about 90 minutes over USB-C. Early units used Micro-USB.
For a vape this compact, that's strong output. The ONE handles 1-3 daily sessions comfortably, but if you vape 5+ times a day, expect to charge it daily.
The battery is not replaceable, so once it wears down, you'll need to contact POTV about service. If long-term battery health matters to you, a portable with a swappable 18650 cell is the smarter long-term buy. There's no pass-through charging either, so plan sessions around the 90-minute recharge window.
Three Clicks to Your First Session
Give a new ONE a 2-hour charge and an empty cycle at 221°C first, repeating until the factory smell is gone. After that, pull off the magnetic attachment, loosely fill the bowl with ground cannabis, and snap it back. Three clicks of the power button turn it on, the plus and minus buttons adjust temperature, and the vape vibrates when it's ready. Under a minute from cold start to first draw.
The included dosing capsule lets you pre-load a session and swap it in on the go. One capsule ships in the box, with extras available from POTV. The capsule slightly reduces airflow, so we preferred loading directly into the oven for the most open draws.
The magnetic attachment also opens up POTV's compatible glass lineup. The mini bubbler, curved bubbler, water pipe adapter, and bent glass stem all fit the same attachment as the stock dimpled stem.
Optional compatible glass pieces; not all are included with the ONE.
Cleaning is quick. Brush the oven out after each session once it's cool enough to touch. For a deeper clean, pull the glass stem and screen and soak them in isopropyl alcohol. Hold the ONE upside down and wipe the oven with a lightly dampened swab so nothing drips into the heater. Clean silicone gaskets with warm soapy water, never alcohol, and keep alcohol off the shell too. Don't push anything into the dimpled stem, and leave the O-rings inside the attachment in place. POTV says they don't come out, so just wipe them. Let everything dry fully and run an empty cycle before your next bowl. POTV's cleaning guide has the full routine, and our cleaning guide covers the basics for every vape.
POTV ONE vs POTV Lobo, XMax V4 Pro and XMax V3 Pro
| Vaporizer | Our score | Heating | Swappable battery | Weight | US list price |
|---|---|---|---|---|---|
| POTV ONE | 7.9 | Hybrid | No, built-in | 144 g | $99 |
| POTV Lobo | 8.6 | Hybrid | Yes, 18650 | 150 g | $159 |
| XMax V4 Pro | 8.9 | Convection | Yes, 18650 | 120 g | $109 |
| XMax V3 Pro | 8.2 | Convection | Yes, 18650 | 105 g | $99 |
| Fury 3 | 8.8 | Hybrid | No, built-in | 159 g | $119 |
POTV ONE vs POTV Lobo: bigger bowl and replaceable battery
The POTV Lobo 8.6 addresses the ONE's two biggest weaknesses. It packs a replaceable 3500 mAh 18650 battery, a bigger bowl (about 0.2 g), and about 10 sessions per charge. The body weighs 150 g, or 156 g with its glass stem. Both vapes use hybrid heating and charge by USB-C, but the Lobo's vapor runs noticeably stronger across the full temperature range.
Both stand 89 mm tall. The ONE is 4 mm narrower, 6 g lighter and $60 cheaper at US list price. If you vape once or twice a day, the ONE handles that load. Heavier users should go straight to the Lobo. Compare both side by side for the full breakdown.
Not to scale: both stand 89 mm tall.
POTV ONE vs XMax V4 Pro: hybrid vs convection
The XMax V4 Pro 8.9 brings full convection, a stainless steel oven, and a replaceable 18650 for $10 more at US list price. The convection system produces cleaner flavor from the first draw, and a charged spare cell gets you back to vaping without waiting on the charger. The ONE counters with a much shorter body (89 mm against 158 mm) and POTV's glass options, so it's the pick if pocket carry matters more than flavor.
POTV ONE vs XMax V3 Pro
Both list at $99. The XMax V3 Pro 8.2 scores 8.2 to the ONE's 7.9, with convection heating, an on-demand mode and a swappable 18650. The ONE is far shorter (89 mm against 150 mm), ships with a glass stem and takes POTV's water pipe adapter and bubblers. Pick the ONE for pocket carry and glass, the V3 Pro for swappable power and quick single hits.
Who Should Buy the POTV ONE
First-time vaporizer buyers who want a complete kit with a glass mouthpiece, water pipe compatibility, and zero learning curve.
Light solo users who vape 1-3 times per day and need a pocketable vape that handles casual sessions without fuss.
Stealth-focused users who need a vape that disappears in a closed fist and stays low-key in public.
Skip it if:
- You vape more than 3 times a day. The battery is sealed in, so you'll be charging most evenings.
- You want a quick hit and nothing more. The ONE runs 4-minute sessions, with no on-demand mode.
- You share bowls. The 0.1-0.15 g oven needs frequent repacking for groups.
- You want flavor above all. The XMax V4 Pro scores 9.2 for vapor against the ONE's 7.4.
Final Verdict
The POTV ONE delivers real value at budget-friendly pricing. The 30-second heat-up, single-degree control and POTV's glass options set it apart from other entry-level portables. If flavor comes first, the XMax V4 Pro scores higher for vapor at a similar price. We recommend the ONE for light to moderate solo users who want a compact, no-fuss introduction to vaping cannabis flower.
The non-replaceable battery and compact oven are the trade-offs you accept, though USB-C charging on current units makes life easier. Heavy users should step up to the POTV Lobo for its bigger bowl and swappable battery. For everyone else, the ONE remains a smart first vape.
