The Vestratto Anvil edges the DynaVap HyperDyn 8.7 to 8.5 overall, and both cost $229. The Anvil hits harder and holds each heat cycle far longer. The HyperDyn holds 2.5 times the Anvil's standard bowl and plugs straight into glass. Pick the Anvil for one-hit power, and the HyperDyn for bigger bowls and DynaVap parts.
Key differences
- Price: a $229 US list price for both.
- Draw window: the Anvil's stored heat keeps each cycle going through a long, slow draw. The HyperDyn needs a reheat every 15 to 20 seconds.
- Heat-up: about 8 seconds to the click on the HyperDyn with a dual-flame torch. Vestratto suggests a slower 40 to 45 second cycle on the Anvil while you learn, and quotes about 12 seconds on its Forge induction heater.
- Bowl: about 0.1 g in the Anvil's Full Bowl, with 0.05 g and 0.2 g options. The HyperDyn holds 0.25 g, plus a 0.125 g dosing capsule.
- Material: 316 stainless steel around a copper core, 65 g. Medical-grade titanium, 55 g.
- Airflow: the Anvil adjusts by rotating its oven. The HyperDyn has 7 condenser positions plus an airport.
- Water pipes: built-in 10 mm and 14 mm tapers on the HyperDyn. Separate adapters for the Anvil.
Vapor and extraction: the Anvil's CopperCore
The Anvil scores 9.4 for vapor quality against 9.0. Its copper layer stores torch heat and feeds it back to the chamber after the click. Aim at the top ring for flavor, the middle for balance, or the bottom for full extraction. A low aim can clear the chamber in one draw. That long draw window also makes passing it around practical.
The HyperDyn delivers thick clouds from a much bigger load. A dual-flame torch brings the cap to its click in roughly 8 seconds. Heat near the crimp for flavor, or near the base for density. The catch is draw resistance, which stays tighter than other torch vapes at this price, even fully open.
Ease of use and technique
Neither is a beginner's vape, but the Anvil scores higher here, 7.5 to 7.0. It needs no spinning, and its snap-disc click is louder than rival torch vapes. Vestratto suggests a slower 40 to 45 second heat cycle while you learn. You'll want a strong magnet to unscrew a hot chamber.
The HyperDyn asks for even rotation through the flame and a stop at the click. Start with the flame near the crimp for a lighter cook and move lower only once you know the bowl. Its heavy titanium cap spreads heat evenly, which makes it forgiving while your technique develops. Plan on 5 to 10 sessions before results become fully repeatable.
Water pipes, induction and accessories
Glass users get more from the HyperDyn out of the box. Its mouthpiece has 10 mm and 14 mm tapers built in. The Anvil needs Vestratto's 14 mm or 18 mm adapter. Through water, though, its density approaches what we get from desktop ball vapes. Our guide to vaporizers with bongs covers both setups.
For flameless sessions, the Anvil pairs with Vestratto's Forge, bought separately with a Milwaukee M12 battery. DynaVap lists the Ispire Wand and YLL heaters for the HyperDyn. Its Hyper Tip also swaps onto any DynaVap stem, which suits owners with a drawer of parts.
What $229 actually buys
Same US list price, different totals. The HyperDyn comes with a 0.125 g dosing capsule and a Tin Case, and its glass tapers are built in. The Anvil's $229 covers the vape, one oven and one bowl. Extra bowls are $35 each, the Utility Case with its hot-bowl magnet is $42, and the 14 mm or 18 mm water pipe adapter is extra. Neither includes a torch. Going flameless on the Anvil adds $369 for the Forge Version 2, plus the Milwaukee M12 battery it runs on. Vestratto also sells the Anvil as a pre-order with no returns, while DynaVap backs the HyperDyn with a limited lifetime functional warranty and a 90-day satisfaction guarantee.
Build and carry
Both are superbly made, with the Anvil at 9.8 for build and the HyperDyn at 9.5. The Anvil's parts mate with zero play, and its screens and O-rings are simple to replace. The HyperDyn's titanium and DuraDyn coating stayed unmarked after weeks of pocket carry and torching.
The HyperDyn edges portability, 9.2 to 8.8, as a slim 16 mm pen. The Anvil is shorter but thicker, and its body stays hot for a while after a session.
Cleaning
Both are simple to clean once cool. The Anvil comes apart by hand. Pull the O-rings before the isopropyl soak, keep track of the small spiral filter, and leave the welded bowl base and snap discs alone. The HyperDyn separates into cap, tip, condenser, mouthpiece and stem. Everything but the cap can go in the soak once the O-rings are out, and the cap gets a swab with a little soapy water. Loading the included dosing capsule keeps the HyperDyn's oven cleaner between deep cleans.
Which should you buy?
- Hardest hits per heat cycle: the Anvil.
- Bigger sessions with fewer reloads: the HyperDyn, with its 0.25 g bowl.
- Bubbler owners who hate adapters: the HyperDyn.
- Sharing a bowl: the Anvil, thanks to its long draw window.
- Current DynaVap owners: the HyperDyn, since your technique and parts carry over.
- Fans of a free-flowing draw: the Anvil.
Both sit on our best butane vaporizers list. Weighing the Anvil against DynaVap in general? Our Anvil vs DynaVap M7 comparison covers the $89 classic. If you want even more per heat cycle than the Anvil, the Vestratto Tornado steps up to a 0.3 g chamber.
